MULCHERS

75 SERIES - 60 - 90 HP

SKIDMOWER^TM

Heavy Duty Flail Hammer Mulcher Fits Most Popular Skidsteers
For Grass and Brush Mowing and Land Clearing

This high speed flail hammer mower will mow everything from heavy and dense grass to standing trees up to 3” in diameter. It features fixed interior beater bars to assist with mulching of material. Four rows of hammers and 2000 RPM rotor speed ensures fast cutting.

The SKIDMOWER is attached to the skidsteer loader through a bridge link. This ensures the mower is “pulled” and not pushed, resulting in better floatation of the head and minimizing the “bulldozing” effect when the skidsteer pitches on rough ground. A front roller pusher guides material into the rotor without obstruction. The SKIDMOWER uses the same double-sided hammer as the Midiforst series mowers.

MODEL	CUTTING WIDTH	NO. OF HAMMERS	WEIGHT kg / LB
SK 175	175 cm / 69 in	18	405 kg./ 891 lb.
SK 200	200 cm / 79 in	21	435 kg./ 957 lb.

Hydraulic Drive: Equipped with hydraulic motor with a relief valve and a uni-directional valve. To achieve a rotor speed of 2000 rpm, an oil flow of between 60 litres/min. (15.85 US gal.) and 120 litres/min. (31.70 US gal.) can be used. The machine will work, but at reduced output down to 54 litres/min. (14.27 US gal.). The machine can be safely used with oil flows up to 150 litre/min. (39.62 US gal.). Pressures should not exceed 210 BAR (3000 PSI). The coupling on the return line must be a “full flow” type with back pressure limited to 1.5 BAR (21 PSI). The connection ports on the motor are 3/4” BSP female.

100 SERIES - 61 to 100 HP

MINIFORST

Capable of felling and mulching trees up to 4.8” (12cm) in diameter

The Seppi MINIFORST is a land clearing forestry mulcher capable of felling and mulching trees up to 4.8” (12cm) in diameter, for use on tractors 90 - 100 HP. The MINIFORST has four rows of teeth with beater bars on the underside of the hood. It is available with a optional swinging hammer rotor allowing for fast cutting/mulching of above grade wood and branches.

Fixed Carbide Hammers, Tungsten Tipped

Adjustable skid height.
Fixed Tungsten Carbide Hammers
Guard Frame

Call for Pricing

Single drive (double drive optional).
Standard Skid Steer Plate Hitch
Hydraulic opening of the rear hood to control degree of mulching.

MODEL	WORKING WIDTH	NO. OF HAMMERS		MIN HP	MAX HP	WEIGHT
MODEL	WORKING WIDTH	SWING	FIXED	MIN HP	MAX HP	WEIGHT
MINIFORST 125	125 cm / 49 in	20	27	48	90	770 kg / 1700 lb
MINIFORST 150	150 cm / 59 in	24	30	48	90	885 kg / 1951 lb
MINIFORST 175	175 cm / 69 in	29	33	55	90	970 kg / 2140 lb
MINIFORST 200	200 cm / 79 in	33	36	68	90	1095 kg / 2410 lb

150 Series - 79 to 110 hp

MIDIFORST

HEAVY DUTY HYDRAULICALLY DRIVEN FORESTRY MULCHER
THAT CAN CUT AND MULCH TREES UP TO 8"

Fixed Tungsten Carbide Blades

Fast cut / mulch Cycle

MidiForst MFSK150 (F), MFSK175 (F), MFSK299 (F) with hydraulic drive, with tree guard frame & fixed knife rotor with tungsten carbide blades

Fixed carbide hammers at 70mm wide the largest in the business.

Stationary beater bars on the underside of the mulcher for superior mulching
Standard Skidsteer style quick disconnect hitch
Will fell and mulch trees up to 8” i diametter.
Available in 3 widths: 150cm, 175cm, 200cm

MODEL	CUTTING WIDTH cm / in	OVERALL WIDTH cm / in	NO. OF HAMMERS	MIN HP	MAX HP	WEIGHT KG / LB
MODEL	CUTTING WIDTH cm / in	OVERALL WIDTH cm / in	FIXED	MIN HP	MAX HP	WEIGHT KG / LB
MFSK100 (F)	100 / 39	179 / 71	16	55	110	780 / 1720
MFSK125 (F)	125 / 49	179 / 71	20	60	110	930 / 2050
MFSK150 (F)	150 / 59	179 / 71	24	70	110	1120 / 2468
MFSK175 (F)	175 / 69	204 / 80	28	80	110	1240 / 2733
MFSK200 (F)	200 / 79	229 / 90	32	90	110	1360 / 2997
MFSK225 (F)	225 / 89	179 / 71	36	100	110	1470 / 3240

TERMS & CONDITIONS

WARRANTY & DISCLAIMER